SafeSteer: Localized On-Policy Distillation for Efficient Safety Alignment

Aligning Large Language Models (LLMs) with human values often degrades their general capabilities, termed the alignment tax. Existing methods mitigate this by balancing dual objectives, which heavily rely on massive general-purpose data or auxiliary reward models. In this paper, we argue that, because safety features are inherently sparse within the output distribution, alignment requires localized modifications rather than global trade-offs. To this end, we propose SafeSteer, which performs on-policy distillation confined to safety tokens. First, we construct a safety teacher via activation steering. Based on this teacher, we develop a safety token selection algorithm. Consequently, SafeSteer restricts the reverse KL penalty to these tokens during training to preserve general capabilities. Experimental results across diverse models show that our SafeSteer achieves a superior trade-off between safety and general capability compared with existing methods, attaining strong safety performance on seven safety benchmarks with only minimal degradation on five general capability benchmarks. Notably, SafeSteer requires only 100 harmful samples without using any general-purpose data, less than 1% of what previous baselines used, considerably reducing alignment cost. More details are on our project page at https://anjingkun.github.io/SafeSteer.

Trans2Occ: Voxel Occupancy Estimation and Grasp for Transparent Objects from Simulation to Reality

Transparent objects remain challenging for robotic perception due to unreliable depth sensing caused by refraction and reflection. While prior approaches rely on multi-view reconstruction or depth completion, they are often difficult to scale or deploy in real-world robotic systems. In this paper, we present a practical framework for transparent object perception and manipulation based on single-view RGB input. Our approach predicts voxel-space occupancy directly from a single image, providing a geometry-aware representation that supports downstream robotic grasping. To enable large-scale training, we construct a simulation pipeline that generates paired RGB images and voxel occupancy annotations under diverse materials and lighting conditions. We demonstrate that the predicted occupancy representation is robust to domain shifts and transfers effectively from simulation to real-world robotic setups without fine-tuning. A simple rule-based grasping strategy built on top of the occupancy further achieves reliable grasp performance on transparent objects. Extensive experiments in both simulation and real-world environments show that our framework provides accurate 3D understanding and enables practical manipulation of transparent objects. These results suggest that single-view occupancy prediction offers a scalable and effective solution for transparent object perception in robotics.

A physics-informed foundation model for quantitative diffusion MRI

Understanding the human brain requires access to its microscopic tissue architecture. Diffusion magnetic resonance imaging (MRI) provides the only noninvasive window into whole-brain microstructure in vivo, yet reliable quantitative mapping remains confined to specialized research settings requiring dense sampling and optimized acquisition protocols. To address this gap, we present a physics-informed generative microstructure network (PIGMENT) that learns a universal generative prior of human brain microstructure and adapts it zero-shot to each participant's measured data to recover subject-specific maps. Trained on 11375 scans spanning multiple sites, vendors, and field strengths, PIGMENT enabled reliable quantitative mapping for tensor, kurtosis, and NODDI models across external datasets from five independent centers. It remains effective where conventional fitting becomes unreliable, recovering meaningful maps from extremely sparse acquisitions while supporting downstream tractography and structural connectivity mapping. PIGMENT estimates demonstrated strong biological validity, preserving submillimeter cortical microarchitectural patterns and early-childhood white matter developmental trajectories from 10-fold accelerated scans. Furthermore, PIGMENT enables reliable quantitative tensor mapping on cost-efficient low-field systems and the extraction of tumor-related biomarkers using ultra-fast clinical protocols. Together, these results establish PIGMENT as a physics-informed foundation model that extends quantitative diffusion MRI into regimes traditionally too sparse, heterogeneous, or clinically constrained for reliable analysis.

UnityMAS-O: A General RL Optimization Framework for LLM-Based Multi-Agent Systems

LLM-based multi-agent systems decompose complex tasks into interacting roles, but most remain manually orchestrated by prompts, tools, and control rules, while agents are rarely optimized through a unified reinforcement learning interface. Existing RL post-training frameworks mainly target single-policy optimization and lack abstractions for user-defined multi-agent workflows, structured interaction, role-specific credit assignment, and configurable parameter sharing. We present UnityMAS-O, a general RL optimization framework for LLM-based multi-agent systems. UnityMAS-O treats the complete workflow as the optimization unit, rather than a single response or policy trajectory. It represents workflows through four first-class objects: logical agent roles, graph trajectories, user-defined rewards, and agent--model mappings. This decouples logical agents from physical model parameters, supporting full sharing, full separation, and partial sharing, with rewards assigned at role, turn, and trajectory levels. UnityMAS-O extends verl with a Ray-based star-topology runtime. A central controller executes workflows, invokes tools, records structured trajectories, and assembles rewards; model-local worker groups handle rollout, buffering, advantage computation, and distributed PPO-style updates. Users can define agents, workflows, model mappings, and rewards without rewriting the optimization infrastructure. We instantiate UnityMAS-O on retrieval-augmented QA, iterative agentic search, and reflective code generation. Across Natural Questions, HotpotQA, and held-out code tasks, multi-agent RL improves manually specified workflows after optimization, with especially large gains for smaller models and strict code all-passed metrics. These results show that UnityMAS-O can serve as a reusable substrate for converting diverse LLM-based multi-agent workflows into trainable multi-agent RL systems.

Towards Multi-Turn Dialog Systems for Industrial Asset Operations and Maintenance

Industrial asset operations and maintenance question answering is inherently multi-turn, iterative, and highly dependent on external tool invocation. However, the conventional plan-execute single-agent architecture exhibits clear limitations in maintaining cross-turn context, and reusing intermediate results. In this paper, we present a multi-turn dialog system designed for industrial scenarios based on a supervisor-specialist multi-agent architecture. To alleviate tool invocation bottlenecks, the system incorporates structured artifact reuse, dynamic replanning, and parallel tool execution. Evaluation results show that our system achieves better response quality compared with the baseline, with planning effectiveness increasing by 54.5% and task completion improving by 37.8%. System profiling further shows that cross-turn artifact reuse effectively reduces redundant tool invocation, decreasing the tool-time share from 47.3% to 26.3% and making turns 2-5 approximately 4.2x faster than the first turn.

Decision-Aware Quadratic ReLU Replacement for HE-Friendly Inference

Fully homomorphic encryption (FHE) supports only additions and multiplications, so FHE-only neural-network inference typically replaces ReLU with polynomials fitted over empirical activation intervals. Such interval fitting often requires higher-degree polynomials to control activation error, incurring homomorphic evaluation costs, while classification is determined by the final logit decision. We revisit ReLU replacement from a decision-aware perspective: given a trained single-hidden-layer ReLU MLP and a specified calibration set, can an HE-friendly low-degree polynomial replace ReLU without retraining while preserving calibration-set decisions? We focus on quadratic replacement, the lowest-degree choice that retains a genuine per-unit nonlinearity. For calibration sets positive-margin separable in the lifted space, we formulate quadratic replacement as a linear separation problem, yielding necessary and sufficient conditions for calibration-lossless replacement and a constructive algorithm for the coefficients. When the positive-margin condition fails -- typically due to a few misclassified calibration samples -- we extend the same geometric framework via reduced convex hulls and Lagrangian-dual soft-margin relaxations, which bound the influence of any single sample, converting the problem into smaller convex quadratic programs that yield approximately feasible coefficients with high empirical agreement on calibration-set decisions. In particular, at the maximal weight cap $μ=1$, the reduced-convex-hull relaxation reduces to the convex-hull separation of the strictly separable case; the relaxation thus continuously extends the exact theory. Under CKKS, the quadratic replacement matches plaintext top-1 accuracy on multiple benchmarks, running 3.7--4.1$\times$ faster than Remez-7 in the activation module and 1.18--1.68$\times$ faster end-to-end.

StepCodeReasoner: Aligning Code Reasoning with Stepwise Execution Traces via Reinforcement Learning

Existing code reasoning methods primarily supervise final code outputs, ignoring intermediate states, often leading to reward hacking where correct answers are obtained through inconsistent reasoning. We propose StepCodeReasoner, a framework that introduces explicit intermediate execution-state supervision. By automatically inserting structured print-based execution-trace anchors into code, the model is trained to predict runtime states at each step, transforming code reasoning into a verifiable, stepwise execution modeling problem. Building on this execution-aware method, we introduce Bi-Level GRPO, a reinforcement learning algorithm for structured credit assignment at two levels: inter-trajectory, comparing alternative execution paths, and intra-trajectory, rewarding intermediate accuracy based on its impact on downstream correctness. Extensive experiments demonstrate that StepCodeReasoner achieves SOTA performance in code reasoning. In particular, our 7B model achieves 91.1\% on CRUXEval and 86.5\% on LiveCodeBench, outperforming the CodeReasoner-7B baseline (86.0\% and 77.7\%) and GPT-4o (85.6\% and 75.1\%). Furthermore, on the execution-trace benchmark REval, our model scores 82.9\%, outperforming baseline CodeReasoner-7B (72.3\%), its 14B counterpart (81.1\%), and GPT-4o (77.3\%). Additionally, our approach also improves code generation performance, demonstrating that explicit execution modeling enhances both code reasoning and code generation.

On Privacy-Preserving Image Transmission in Low-Altitude Networks: A Swin Transformer-Based Framework with Federated Learning

The rapid development of low-altitude economy has driven the proliferation of Unmanned Aerial Vehicle (UAV) applications, including logistics, inspection, and emergency response. However, transmitting high-volume image data from UAVs to ground stations faces significant challenges due to limited bandwidth and stringent privacy requirements. To address these issues, a Semantic Communication (SC) framework based on Federated Learning (FL) is proposed for efficient and privacy-preserving image transmission. A Swin Transformer-based Semantic Communication (STSC) architecture is designed to extract multi-scale semantic features under constrained bandwidth conditions. Dedicated communication and computing nodes are deployed on UAVs to enhance real-time coverage and flexibility. Meanwhile, a FL mechanism enables global model training across distributed devices without sharing raw data, thus preserving user privacy. Simulation experiments conducted on the CIFAR-10 dataset demonstrate that the proposed STSC framework achieves at least 5.7 dB improvement in Peak Signal-to-Noise Ratio (PSNR) compared to DeepJSCC baselines, while also showing superior convergence and generalization performance. The framework effectively integrates UAV-assisted deployment with SC and privacy protection, offering a practical solution for bandwidth-constrained image transmission in low-altitude networks.

Pest-Thinker: Learning to Think and Reason like Entomologists via Reinforcement Learning

Pest-induced crop losses pose a major threat to global food security and sustainable agricultural development. While recent advances in Multimodal Large Language Models (MLLMs) have shown strong potential for visual understanding and smart agriculture, their direct application to pest recognition remains limited due to the domain's unique challenges such as high inter-species complexity, intra-species variability, and the scarcity of expert-annotated data. In this work, we introduce Pest-Thinker, a knowledge-driven reinforcement learning (RL) framework that enables MLLMs to reason over fine-grained pest morphology. We first construct two high-definition pest benchmarks, QFSD and AgriInsect, comprising diverse species and expert-annotated morphological traits. Leveraging these datasets, we synthesize Chain-of-Thought (CoT) reasoning trajectories to facilitate structured learning of pest-specific visual cues through Supervised Fine-Tuning (SFT). Subsequently, we employ Group Relative Policy Optimization (GRPO) with a novel feature reward that guides the model to focus on observable morphological evidence, assessed by an LLM-as-a-Judge strategy. Extensive experiments demonstrate that Pest-Thinker substantially improves both in-domain and out-of-domain morphological understanding, marking a step toward expert-level visual reasoning for intelligent agricultural pest analysis. The datasets and source code are available upon acceptance.

LabBuilder: Protocol-Grounded 3D Layout Generation for Interactable and Safe Laboratory

Automated laboratories hold the promise of accelerating scientific discovery, yet their deployment is bottlenecked by the difficulty of designing safe and executable environments. While simulator-based design offers scalability, existing 3D scene generation methods are primarily tailored for household settings, optimizing for visual plausibility while neglecting the rigorous functional semantics and safety constraints essential for scientific experimentation. We present LabBuilder, an end-to-end system that generates and verifies 3D laboratory layouts from concise textual specifications. It operates through three tightly coupled components: LabForge first curates a meta-dataset of annotated assets and chemical knowledge, translating natural language specifications into structured protocols; building on these protocols, LabGen synthesizes laboratory layouts via an iterative, constraint-aware optimization strategy; finally, LabTouchstone evaluates the resulting layouts as a unified benchmark. Extensive experiments demonstrate that LabBuilder significantly outperforms existing state-of-the-art methods, producing laboratory environments that are not only realistic but also functionally valid and safe for complex experimental workflows.